Use this to set options for the Microarray Estimates from Log-ratios menu.
Display
The results to be displayed in the Output window:
| Slide design | Summary of the red and green treatments on each slide, and the design efficiencies. |
| Summary of estimation | Table giving a summary of the proportion of results that were significant at various levels of significance. |
| Monitoring information | Progress details on the number of probes analysed so far. |
Estimate dye bias from dye swaps
Fit an effect for dye bias from slides which have the targets on different dyes. This 1 degree of freedom effect can be calculated and removed if some targets are on both dyes. This requires that targets have been swapped between the Red and Green dyes between slides. This is normally achieved by the use of dye swap pairs such as (A B) and (B A). If a probe has dye bias, then changing the targets around does not change signs of the log-ratio, a particular dye is preferentially binding to the probe rather than a particular target.
Action buttons
| OK | Save the options settings and close the dialog. |
| Cancel | Close the dialog without making any changes. |
| Defaults | Reset options to their default settings. |
Action Icons
 |
Clear | Clear all fields and list boxes. |
 |
Help | Open the Help topic for this dialog. |